top of page
Watec 2400S

Watec 2400S

WAT-2400S IP with PoE
Network camera, supporting FULL HD. The 1/2.8" BSI CMOS image sensor enables high resolutionand competitive high sensitivity to our analog cameras.
 
Key features:
  • Supporting microSD enables stand-alone recording without the network connection
  • Video output quick start-up in 6 sec.
  • Power-saving PoE : 2.40W/50mA DC+12V : 1.80W/150mA

  • Sensor: ½.8-inch BSI CMOS

 

  • Output size: 1920×1080, 1280×720, 800×600, 704×480, 704×400, 640×480, 640×360, 320×240

  • Max. frame rate : 30fps

  • Video compression: H.264, MJPEG

  • Minimum illumination: 0.007 lx F1.2 (AGC HIGH=72dB, Shutter=OFF)

  • White balance: ATW, PWB, MWB, PRESET, (3000K, 5000K, 8000K)

  • Miroir: OFF, V-FLIP, H-FLIP, HV-FLIP

  • Motion detection: ON/OFF 4 areas arbitrarily configurable

  • ONVIF: Profile S

  • Supported Protocols: TCP/IP, UDP/IP, RTP, RTCP, RTSP, SNTP, HTTP, FTP, DHCP, DNS, UPnP

  • Interface: RJ45 (10BASE-T, 100BASE-TX) / 4P Connector (Audio In, Power In) 、Auto Iris, MicroSD

  • Power supply: PoE +48V, DC+12V±10%

  • Power consumption: 1.92W/40mA (PoE +48V), 1.56W/130mA (DC+12V)

  • Operating temperature: 0 - +50°C

  • Storage temperature: -30 - +70°C

  • Lens mount: CS mount

  • Weight: Approx. 80g